UST Corporation Inc.

 TEL ACT8 4inch Conversion COT Unit Wafer Flow Test  TEL ACT8 4inch Conversion DEV Unit Wafer Flow Test if you want to see more detail then pls visit to www.ustsemi-corp.com  and send email to marco@ustsemi.com

 TEL ACT8 OPEN CASSETTE 2C2D Wafer Flow Test if you want to see more detail then pls visit to www.ustsemi-corp.com  and send email to marco@ustsemi.com

 Wafer Pre-Aligner - Wafer Size (2inch ~ 18inch) - Notch, Flat Wafer, Ring Type, Thin Wafer (50um) - Si, Glass, Film, Sapphire  - Compact Size - Fast Alignment (< 3.5sec) - High Performance Accuracy and Repeatability - Easy to use and Install - Ethernet , RS-232 Communication - Auto Detect function of Notch and Flat Type  - Si, Glass, Sapphire Type Simultaneous use  - Wafer Edge Crack and Broken Detect  - 2inch ~ 12inch Simultaneous use (CCD Stage Moving Type) - Poor Coating and Cracked wafer support alignment  - Crack Point's degree and quantity information output function (max. 500ea) - Covered Tape at Notch point by Laminator support alignment  - Wafer Serial Number Reading, Detect by OCR and output information if you want to see more detail then pls visit to www.ustsemi-corp.com  and send email to marco@ustsemi.com

 VSP  (Momentary Voltage Hunting and Breakout & Solution Concept) 1) Nature’s factors : Lightning strikes, mountain fire, snow storms, line faults, overgrown vegetation, flash over, animals,.. 2) Artificial factors : Power line system troubles (disorder), utility networks troubles, overload operation,.. 3) Normal duration time : within 0.5 sec(80~90%)   1sec compensation is enough 2. Power trouble influence  time & cost loss 1) Control system shut down (Unexpected) 2) Data loss 3) System rebooting 4) Abnormal errors increasing on the electronic systems 5) Transformer noise & overheat 6) Motor down & noise,…. 3. Sag management in the semiconductor & display lines 1) 0.5~1.0 sec defense system 2) EMO & control line defense by the condenser backup system  if you want to see more detail then pls visit to www.ustsemi-corp.com  and send email to marco@ustsemi.com

TEL/DNS/SEMES Spin Scrubber Refurbishment and Overhaul  6inch and 8inch Multi flow 4inch and 6inch Multi flow Cassette Unit and Robot modification Mapping Sensor Block modification  Consumable Parts Support 2nd Source Parts Support Labor and Service Support if you want to see more detail then pls visit to www.ustsemi-corp.com  and send email to marco@ustsemi.com

Chemical Cabinet / Auto Chemical Supply System Overhaul and upgrade CSS or Manual Supply or Both Type Modification Buffer Tank Auto Exchange Type System Modification Solvent/Develop/HMDS Chemical Supply System  Resist Cabinet Photo Resist Auto-Exchange System Auto Drain Controller and Tray System  if you want to see more detail then pls visit to www.ustsemi-corp.com  and send email to marco@ustsemi.com

TEL Clean Track Mark and ACT-8,12 Hot and Cooling Plate  Hot / Cooling Plate Production CPL, HCP, ADH, LHP, HHP, HCH, CHP Assembly Production Hot Plate Modification (LHP ⇔ HHP, CPL ⇔ HCP) Thermo Controller Production Same condition with OEM Thermo Controller and SMC 200mm / 300mm ‘s Circulator Repair if you want to see more detail then pls visit to www.ustsemi-corp.com  and send email to marco@ustsemi.com

 2nd Source DEV LD Nozzle Assy for ACT-8,12 TEL ACT12 LD Nozzle 6,8,12 inch Conversion and 2nd source new production - 6,8,12 inch LD Nozzle Assy  - 6,8,12 inch LD Nozzle Bath Assy  - 6,8,12 inch LD Nozzle CUP Assy 2nd Source Spin COT & DEV Unit Assy for ACT-8,12 if you want to see more detail then pls visit to www.ustsemi-corp.com  and send email to marco@ustsemi.com

  TEL MARK-II,V,VZ,7,8 and ACT-8,12 of 2nd Source Parts and Unit    Fast delivery and low-cost and same condition with OEM parts Cassette stage assembly manufacture C/S Arm, Main Arm (Ceramic, Vacuum Arm, Aluminum and Anodizing Type) manufacture Plate (LHP, HHP, CPL, HCP, ADH, HEL and CP Power Supply) manufacture Fan Filter Unit A,B Type (Include HEPA Filter) Oven Central Stack  manufacture of TEL ACT 8,12 2nd Source parts Unit of TEL Mark-II, V, Vz, 7,8 and ACT-8,12 L/E Tank (45cc, 100cc, 150cc, 200cc, etc) manufacture TEL MARK and ACT SMIF Type Unit  manufacture of same condition with OEM COAT Nozzle Assembly (EBR, Back Side Rinse and Photo Resist Nozzle Tip) manufacture DEV Nozzle Assembly (H, SH, Spray and Stream type) manufacture Plasma to TFT LCD modification and upgrade for TEL Mark on Low Cost        if you want to see more detail then pls visit to www.ustsemi-corp.com  and send email to marco@ustsemi.com